Custom Manufacturing

3T-AM turns metal printing toward repeat production as SBO funds expansion

Ines FarkasNovember 16, 20265 min read3 views

At a glance

  • UK metal additive manufacturer 3T-AM says about 70% of revenue now comes from production work, while new product introduction still absorbs most of its engineering time.
  • 3T Additive Manufacturing has moved roughly 70% of its revenue onto repeat production orders while new product introduction still takes about 80% of the team's time, according to its commercial director. New owner SBO has approved a five-year plan and is funding additional EOS metal printers and post-processing capacity, with carbon-reporting digital product passports targeted for every part by the end of 2028.
Concept illustration: a technician inspects freshly printed metal components on a build plate in a metal additive manufacturing workshop, with a multi-laser printer and machining equipment behind.

3T Additive Manufacturing, the Newbury-based metal printing specialist, now generates around 70% of its revenue from production, according to commercial director Eddie Andrews. New product introduction, by contrast, still consumes roughly 80% of the team's time, he said in 3D Printing Industry's AM UK series ahead of Formnext 2026.

Andrews joined in November 2021, when the company could produce a one-off metal component for any of hundreds of customers. The harder problem was winning the order to make the same part again, at the agreed price and on schedule, turning individual prototype jobs into repeatable general manufacturing.

Demand mix

Semiconductor customers currently generate the strongest demand, followed by energy, then space and defence. Aerospace remains central to the company's plans, but 3T-AM has found work for its machines while it waits for more aerospace programmes to reach suppliers at volume.

Process ownership and machining

The business dates to 1997 and took delivery of its first metal machine around 2008. By the 2021 reset, years of accommodating individual prototype jobs had layered process upon process onto the shop floor. Management narrowed the customer base, gave larger accounts more influence over what it developed and simplified accumulated procedures, although much of the work remained manual while the team established which operations it could reliably repeat.

Responsibility shifted as well. Where the engineer who first saw a drawing also decided how to print it, a product owner is now accountable for delivering the finished component, and printing and machining specialists agree the condition a part should be in as it passes between operations. Andrews argues that a successful additive manufacturer must also be a strong CNC machining business: bringing machining in-house gave the SME more control over cost, quality and delivery dates, while larger multi-laser machines raised productivity at the printing stage.

Capacity bought against orders

Previously 3T-AM might buy an EOS M400 to trial a material and see what business followed. Today, Andrews says, customer programmes account for the capacity of incoming machines before they reach the factory, which he describes as a fairly unremarkable kind of investment.

Austrian precision manufacturing group SBO acquired 3T-AM in October 2025. The Newbury business had sales of around £5 million in 2024. SBO brought experience machining downhole drilling equipment, including components up to ten metres long, and was drawn by 3T-AM's metal printing expertise and access to a different set of industrial customers. The group approved a five-year business plan and asked whether it could be delivered faster. In August 2026 it reported that 3T-AM had added an EOS M400 in the second quarter, ordered another printer and invested further in post-processing, as part of a seven-printer expansion across UK and US operations.

Where the economics tighten

For some customers, replacing a casting with a printed part pays through lead time alone: a legacy or development programme obtains a component sooner, even at much the same unit cost. At higher volumes the calculation becomes harder. Maintenance contracts and consumables weigh on the hourly rate, and a single-shift factory has fewer productive hours over which to spread them. Andrews sees lessons in CNC shops that run around the clock, and identifies support removal as one candidate for automation, since the step can still depend on an experienced operator's knowledge of a particular job.

He also recalls a pre-pandemic aerospace enquiry in which a single family of parts would have required 16 multi-laser systems to cover only a share of the requirement, a factor he sees as one reason original equipment manufacturers still keep sizeable additive programmes in-house.

Measuring the benefit

A project with Honeywell Aerospace will test another claim. Under an Aerospace Technology Institute-funded programme, the partners are converting an existing conventionally manufactured component to additive production. The sustainability team at the NCC in Bristol is running a 12-month life-cycle assessment covering manufacture, service and end of life, comparing the two manufacturing routes alongside any benefit the redesigned component delivers in service. Printing closer to finished shape is expected to use less feedstock and leave less metal to machine away than starting from billet.

In Newbury, 3T-AM is connecting its factory and enterprise systems and developing digital product passports that document the carbon associated with making an individual component. Andrews wants that information to accompany every part at no extra charge by the end of 2028, which would make it something a purchasing department compiling a supply-chain emissions report could expect from a routine order.

Reported by Ines Farkas, Tool Quality and Sourcing Analyst.