Florida-based construction 3D printer manufacturer AMTG has said that three of its G2 gantry systems were used together to produce the printed wall system for the Mella shopping center, a commercial project developed by one of its customers.
According to AMTG, the project used three synchronized G2 construction 3D printers in a coordinated workflow. Long wall sections, openings and architectural transitions were formed directly during printing. Deploying several machines let the project team distribute work across the building footprint rather than relying on a single printer.
Coordinating three construction 3D printers
AMTG describes the G2 as a high-reach gantry construction 3D printer designed for large building projects. Its modular Cartesian structure can be configured according to building geometry and site requirements. For Mella, the three systems produced long wall sections, openings and architectural transitions directly during printing.
The company has not disclosed how the three printers were synchronized, including whether they ran simultaneously under centralized control or followed coordinated production schedules. Even so, the project illustrates one route to scaling construction 3D printing: deploying multiple gantry systems instead of a single machine.
AMTG said its involvement was limited to supplying the printing systems, operator training and equipment-operation certification. Structural design, materials and construction remained the responsibility of the customer's qualified professionals.
AMTG's three printer families
Beyond the G2, AMTG offers three construction 3D printer families:
- R-Series: road-mobile and tracked robotic systems for rapid deployment.
- G-Series: gantry printers for on-site construction.
- F-Series: factory-controlled production of prefabricated components.
3D printing moves into commercial construction
Construction companies are increasingly integrating 3D printing into commercial building work. In the United States, Alquist announced an expansion of its construction 3D printing operations through a partnership involving Walmart, construction firm FMGI and equipment supplier Hugg & Hall. The initiative covers more than a dozen commercial projects and includes equipment deployment, operator training and technical support, reflecting a model in which contractors fold 3D printing into their existing operations.
A similar approach has emerged in Germany, where construction group Matthäi established a dedicated 3D printing division after completing a two-storey office building. Using a COBOD BOD2 printer, the company produced the building's walls in roughly 105 hours, while foundations, floors and roofing were completed with conventional methods.
Expanding capacity and reach
Other projects are exploring ways to increase production capacity and extend the areas covered by automated equipment. In France, the ViliaSprint² development used a COBOD BOD2 printer to build a three-storey, 12-apartment residential building. Its walls and load-bearing structure were printed in 34 days, against an initial estimate of 50 days, and the project partners are planning a larger development involving two printers operating simultaneously.
In Australia, construction technology company Luyten 3D introduced the ASCEND A27, a tower crane-mounted concrete 3D printer with a working radius of up to 45 meters. Unlike conventional gantry systems, it is designed to cover larger construction footprints from a single installation point.
