ArcelorMittal S.A., Mitsubishi Heavy Industries, Ltd. (MHI), BHP Group Ltd. and Mitsubishi Development Pty Ltd have completed the first phase of a carbon-capture trial at ArcelorMittal’s integrated steelworks in Gent, Belgium. The partners said the pilot, using MHI’s Advanced KM CDR Process on blast furnace gas, achieved carbon dioxide capture rates above 90% and produced operating and engineering data for assessing a full-scale installation at the site’s blast furnace.
The first phase ran for more than 4,500 hours and focused on a portion of the blast furnace off-gas. According to the partners, the campaign showed that the capture technology can operate in a demanding steelmaking environment where the gas carries dust, sulfur-bearing compounds and other contaminants.
On the basis of phase 1 results, assessments indicate that applying the process at full scale to pre-combustion blast furnace off-gas could reduce CO2 intensity at the Gent site by up to 24%. Extending carbon capture to multiple emission points across the plant could, the partners say, support progress toward near-zero emissions intensity.
The blast furnace off-gas contains both CO2 and carbon monoxide. Phase 1 captured only the CO2; the remaining carbon, in the form of CO, can be used elsewhere at the integrated site for power and heat, with CO2 released when that gas is combusted. The trial therefore addressed one part of the gas stream’s carbon content rather than all of it.
Phase 2 broadens testing to the reheating furnace
The second phase will broaden testing to several emission points in the steelmaking process. One focus is gas from the hot strip mill reheating furnace, which is fired with gas and heats thick steel slabs to the temperature needed for rolling into thin sheets. The furnace uses a mix of by-product gases, including coke oven gas, blast furnace off-gas and basic oxygen furnace gas, along with natural gas, creating a post-combustion capture point with a different and more variable flue-gas profile.
Phase 2 is intended to provide more data on integrating capture across multiple sources and to inform updated engineering and deployment studies for future commercial-scale applications. The partners said combining capture across processes could support progress toward near-zero emissions intensity for blast furnace steelmaking.
ArcelorMittal is facilitating the trial at its Gent site. MHI supplies its proprietary Advanced KM CDR Process and leads carbon-capture process engineering and technical evaluation. BHP and Mitsubishi Development, which supply high-quality steelmaking raw materials to ArcelorMittal’s European operations, are funding the work.
Frederik Van De Velde, CEO of ArcelorMittal Belgium, said the partners had set out to better understand how carbon capture can be incorporated into existing steel plants and that he was pleased with the successful first stage, which provided important data for scaling the technologies needed for decarbonization. Tatsuto Nagayasu, senior vice president and head of CCUS at MHI, described the operating campaign and capture rate as a milestone for applying the company’s technology in the steel industry, citing its performance under dust, sulfur and other impurities while producing data for commercial-scale design assessments.
Dr. Ben Ellis, vice president of marketing sustainability at BHP, said the results are very promising for the blast furnace and integrated steelmaking route. He noted that about 70% of global steel production currently comes from blast furnace steelmaking and that the route is expected to remain important for decades, making emissions reductions from the blast furnace necessary alongside development of alternative steelmaking pathways.
Tadashi Mizuno, managing director and CEO of Mitsubishi Development, said phase 1 had strengthened confidence that carbon capture on blast furnace gas could be a viable emissions-reduction pathway for steel. He said energy-efficiency improvements and high-quality raw materials will remain important in the near to medium term, while technologies such as CCUS could contribute significantly to the industry’s longer-term decarbonization.
