Instruments & Meters

ETEL Introduces METIS HP Air-Bearing Platform for Semiconductor Scanning

Hana IshikawaOctober 18, 20265 min read5 views

At a glance

  • New planar motion platform targets step-and-scan lithography, laser writing and inspection with encoder-based tool-point measurement and a 4-DoF fine-control module.
  • ETEL has introduced the METIS HP, a full air-bearing planar platform for step-and-scan semiconductor processing, direct laser writing and high-resolution optical inspection. The company says its mDoF encoder enables projected tool-point measurement and a trigger approach that avoids a carriage mirror, while listing ±150 nm accuracy over the XY stroke and ±150 nm dynamic straightness.
Conceptual illustration of a precision air-bearing motion stage holding a large square substrate, with encoder tracks and motion-path accents in a clean laboratory setting.

ETEL, a HEIDENHAIN company and a supplier of high-performance motion-control components and complete motion platforms, has introduced the METIS HP. The new full air-bearing planar platform is designed for demanding step-and-scan semiconductor applications, including direct laser writing and high-resolution optical inspection systems. ETEL says the product strengthens its position in high-precision motion control by combining speed and stability with dynamic straightness and projected tool-point measurement.

At the core of the METIS HP is a multi-degree-of-freedom (mDoF) HEIDENHAIN encoder. ETEL says this architecture ensures accuracy without thermal drift and enables projected tool-point measurement. The company’s controllers can emulate a transistor-transistor logic (TTL) position signal for use as a trigger event, allowing the signal to be coordinated with stage position. According to ETEL, this is a compelling alternative to the classical interferometer used as an advanced trigger generator. The design eliminates the need for a mirror on the carriage and avoids air-lensing effects and air perturbation, and ETEL also cites lower cost.

Motion and throughput specifications

ETEL lists ±150 nm accuracy over the full XY stroke after mapping and ±150 nm dynamic straightness at speeds up to 1 m/s. The platform’s dynamic capabilities reach accelerations up to 20 m/s². The accuracy figure applies across the full XY stroke after mapping, while the straightness figure is specified at the stated scan speed. ETEL says these characteristics minimize turnaround time and thereby increase machine throughput in step-and-scan applications. The company also describes the platform as delivering speed and stability together with the projected tool-point measurement capability.

Inspection and large-area processing

High-end inspection applications for advanced packaging require rapid and precise focal-distance adjustments. The METIS HP includes a high-bandwidth 4-DoF module that provides fine control over the Z, tip, tilt and theta axes. ETEL positions the platform as the optimal choice for these demanding inspection tasks. The company describes the module as high-bandwidth, which it links to the fine control needed for inspection.

The METIS HP supports panel sizes up to 600 mm × 600 mm. ETEL says this addresses the growing need for next-generation maskless lithography with large-area substrates; the panel capability is aimed at those large-format substrates. Stéphane Pellegrini, product manager at ETEL, said the platform builds on the company’s long-standing expertise in high-precision platforms and provides the trajectory quality required for advanced optical processes. He added that its speed stability and dynamic straightness are intended to ensure consistent performance even at high scanning velocities.

Reported by Hana Ishikawa, Photometric Test and Procurement Editor.