The Electrical Safety Roundtable (ESR) has published new consumer guidance covering the purchase, installation and use of plug-in solar devices, warning that buying a unit from a supermarket, DIY store or online retailer is only the starting point.
The guidance explains the checks and precautions the organisation says are needed to help ensure such systems are compliant, suitable for the property and installed correctly.
Compliance and product labelling
According to the ESR, a compliant plug-in solar device should meet the Plug-in Solar Device Interim Product Specification and be clearly marked, with a statement confirming compliance supplied alongside it. The labelling should identify the manufacturer, the model or serial number, the voltage, frequency, current and rated power, and the IP rating and protection class.
Consumers are advised to buy from reputable suppliers, follow all supplied instructions and never modify the plug, cables, inverter, panels, connectors or any other supplied components.
Siting, cabling and pre-installation checks
Ideally, the device should be connected to a nearby external socket-outlet that is suitably located and protected. Cables should not be trapped in doors or windows, since this can damage them, and poorly routed or secured cabling can create trip hazards as well as further risk of damage.
Before purchasing, the ESR strongly recommends that consumers find a qualified and competent electrician to carry out the necessary checks on the household electrical system ahead of installation.
Permissions and notification
The guidance also covers administrative steps. Consumers should contact their insurer before buying a device. People living in flats or apartments may need approval from the building owner, while tenants must seek permission from their landlord. Managing agents, planning authorities and other interested parties should be informed where applicable.
After installation, the Distribution Network Operator must be notified within 28 days, and the instructions supplied with a compliant system should explain that process.
Who the guidance is intended for
The ESR describes the document as a resource for anyone supporting consumers who are considering plug-in solar. Letting agents and landlords can share it with tenants and residents to explain the permissions and safety checks that may be required, while organisations can use it to raise awareness and point consumers towards clear, consistent information. Electricians can also share it with potential customers to explain why checks by a qualified and competent electrician matter before installation.
Nick Hayler, Chair of the Electrical Safety in the Home group, said the organisation supports innovation that can help households embrace renewable energy and reduce their bills, but that it has to be done safely. He said consumers should follow the guidance and use a competent and qualified person to help ensure their plug-in solar device is suitable and installed correctly.
