Industrial Machinery

Fives HPM Pitches RoboTDM Robotic Machining as Alternative to Large CNC Tools

Roshni IyerOctober 29, 20265 min read7 views

At a glance

  • Fives High Precision Machines says its Liné Machines RoboTDM moves milling, trimming and drilling onto the workpiece, targeting large parts that do not need tolerances tighter than about 0.1 mm.
  • Fives HPM is offering the Liné Machines RoboTDM, a robot-based machining system intended for large components where tolerances down to roughly 0.1 mm are acceptable, and reports cycle time reductions of up to 70% in trimming and milling from multi-year development trials. The company presents the technology as complementary to CNC machine tools rather than a replacement where tighter precision is required.
A robotic arm with a spindle end effector mills a large curved panel held on a low fixture in a factory bay.

Fives High Precision Machines (Fives HPM) is positioning its Liné Machines RoboTDM as an alternative to large CNC machine tools for components that do not demand the tightest tolerances. The system equips an industrial robot with a specialised end effector carrying a spindle, toolholder and cutter, so that milling, trimming and drilling can be carried out directly on large workpieces.

Fives argues that where tolerances down to approximately 0.1 mm are acceptable, investing in a large CNC machine can mean paying for capability the application does not use. Rather than bringing the component into a large machine envelope, RoboTDM brings the machining capability to the workpiece, which the company says can reduce equipment cost and floor space while shortening set-up and simplifying programming.

Applications and operations

According to Fives, suitable work includes metal face milling and deburring, such as removing burrs from castings or trimming excess weld beads. The system can also drill pilot holes on large aerospace panels or automotive body parts, and perform trimming, routing, drilling, edge contouring and pocketing on large composite or thermoplastic fabrications.

  • Face milling and deburring of castings and weld beads
  • Pilot-hole drilling on large aerospace and automotive parts
  • Trimming, routing, contouring and pocketing of composite structures

Closing the accuracy gap

Conventional industrial robots have typically achieved tolerances of around 0.3 mm, which Fives describes as insufficient for many machining tasks. The RoboTDM development work focused on high-precision robotic machining, combining robot calibration with look-ahead and motion-planning algorithms that allow programs containing more than one million points to run without the latency that can otherwise compromise robot motion. Fives says the result is smoother trajectory execution supporting multi-axis contouring and complex operations, with machining deviation reduced by up to 100 μm, or 0.1 mm — a threefold improvement over conventional robotic accuracy by the company's account.

The end effector can be configured with different spindle sizes, power ratings, torque and speed. Fives lists spindle power of up to 125 kW, torque of up to 80 Nm and speeds reaching 30,000 rpm, with HSK A63, HSK F63 or HSK A100 taper toolholders. Optional functions include automatic tool changing, tool measurement, tool-breakage detection and part probing, while a vision system can support drilling. The same platform can also be configured for waterjet cutting, laser profiling and ultrasonic cutting.

Sectors, limits and background

Fives identifies aerospace, defense, maritime and energy as particularly relevant sectors, where component dimensions can be substantial and production requirements vary widely. RoboTDM can be configured with multiple workstations and customised peripheral equipment, and its relatively modest foundation requirements are presented as simplifying installation compared with a large CNC machine tool.

The company is explicit about the boundary: where tolerances tighter than 0.1 mm are necessary, a high-precision CNC machine remains the appropriate choice, and RoboTDM is described as complementary to the Liné Machines and wider Fives HPM machine tool portfolio.

Fives frames RoboTDM under its 'precision at scale' cross-brand message and the newly unified Fives HPM banner, with the Liné Machines brand contributing its experience in large-scale milling and material removal. The company says the system originated from customer requirements. Fives Liné Machines Inc, now part of Fives HPM, has operated in North America for almost 50 years from its facility in Granby, Quebec, Canada, which produces Liné CNC machine tools and robotic solutions including RoboTDM and supports engineering, integration, automation, service and training across equipment lifecycles.

Fives reports that a multi-year research and development project and development trials demonstrated cycle time reductions of up to 70% in trimming and milling, with some individual applications achieving greater savings. The company's stated aim is to give manufacturers another option between conventional robotics and the cost of a large CNC machine tool.

Reported by Roshni Iyer, Contract Manufacturing Sourcing Analyst.