Spanish ophthalmic technology company IOT says it has become the first company to 3D print personalized progressive lenses. Its Light-Form Technology forms a complete lens from a single flash of light in a few seconds, and IOT says lenses made this way are already on sale to consumers.
The process differs from conventional lens surfacing and layer-by-layer additive manufacturing. Light-Form does not build a lens gradually; instead, it cures the whole volume of the lens in one pass. The forming stage takes seconds, after which several finishing steps are required before the lens is complete: unused resin is recovered to reduce waste, the surface is hardened, and the lens is mapped.
Photopolymerization in one pass
IOT describes the method as based on stabilized frontal photopolymerization. That approach allows light to cure the entire lens volume at once rather than shaping it from a blank through the generating and polishing steps used in conventional surfacing. IOT says the process therefore skips those steps entirely.
According to the company, a new production method for personalized progressive lenses must precisely reproduce the intended optical design, not merely produce a recognizable shape. IOT says Light-Form combines the design freedom of digital manufacturing with these demanding optical requirements, allowing additive manufacturing to produce prescription lenses at commercial optical quality. The company adds that the approach could open more options for future lens architectures and individualized solutions.
“Light-Form demonstrates how scientific research can change the way ophthalmic lenses are made,” said José Alonso, co-founder and CINO of IOT. He added that pairing optical precision with a new production method could help optical partners create personalized products, test new lens architectures and run more flexible manufacturing.
Resource use and production layout
IOT also claims the method is much lighter on resources than traditional lens production. Compared with conventional methods, it says Light-Form uses no water in manufacturing, needs 90% less energy and produces 76% less waste. The company notes that these figures cover the manufacturing stage only.
The company presents the technology as a way to redesign the production chain, not just a faster forming step. Larger installations could use several printing heads to increase output without taking up much floor space. Further ahead, IOT envisions compact machines making custom lenses inside optical stores, putting production closer to the customer and reducing the need to hold stock.
“The value lies in rethinking the production workflow,” said Carolina Gago, COO of IOT. “Resin recovery and lower water and energy requirements address how resources are used, while compact equipment could support production closer to consumers. We are working to translate these capabilities into practical manufacturing options.”
For optical laboratories, IOT suggests this could mean organizing capacity around local demand instead of relying only on centralized surfacing equipment. For wearers, the company says the long-term benefit would be faster access to lenses made for them. IOT says optical partners would still play the central role in vision correction and customer service.
Beyond conventional spectacles
IOT is also looking beyond conventional spectacles. One option under development is printing prescription optics directly onto waveguides and flat substrates for smart glasses and augmented reality headsets, which could make devices thinner and lighter. The company also suggests that custom optical shapes could eventually be useful in virtual reality.
The company is positioning Light-Form as a change to how lens production is organized, not only a new way to form lenses. It plans to replace reliance on conventional surfacing infrastructure with production set up around local demand and sees in-store manufacturing as a possible way to bring personalized lenses closer to the wearer.
Other projects in the 3D printing sector also use digital manufacturing to make vision correction more personalized and on demand. Luxexcel was an early example in prescription eyewear. Conventional prescription lenses tend to require around 30 manufacturing steps, large inventories and high wastage. Luxexcel instead built lenses layer by layer in a material jetting process, and its platform could print single-vision and freeform lenses and multifocal progressive designs. It also embedded waveguides for smart glasses, a direction IOT is now exploring. Meta later acquired Luxexcel as part of its augmented reality technology efforts.
More recently, the approach has moved into point-of-care contact lenses. A team at the University of Waterloo has developed a system that 3D prints custom contact lenses in roughly 20 minutes, raising the prospect that a patient could be measured, have a lens designed, and walk out wearing it after one clinic visit. The work earned a Gold Medal at the Shanghai International Exhibition of Inventions in June 2026.
These projects show additive manufacturing moving into optical production. IOT says its Light-Form personalized progressive lenses are already reaching consumers, while its wider production and smart-glasses concepts remain at earlier stages.
