Industrial Machinery

KraussMaffei Extrusion Develops Continuous Single-Stage Process for PVC Roofing Membranes

Maren OstergaardNovember 17, 20265 min read16 views

At a glance

  • PVC InlineMixing feeds solid and liquid components directly into a twin-screw extruder, removing the separate hot-cold mixing and dry-blend storage steps.
  • KraussMaffei Extrusion has developed PVC InlineMixing, a continuous single-stage process that meters PVC, plasticizers, additives and fillers directly into a twin-screw extruder for roofing membrane production. The company reports lower energy, space, labor and maintenance requirements, along with faster formulation changes, and says an industrial reference line reaches 1,800 kg/h using two extruders and two calenders.
A conceptual view of a continuous extrusion line with gravimetric feeders, a twin-screw barrel and calender rolls forming a PVC roofing membrane.

KraussMaffei Extrusion has developed a continuous single-stage extrusion process for PVC roofing membranes under the name PVC InlineMixing. The process is intended to replace the conventional two-stage route in which a separate hot-cold mixer produces a dry blend that must be cooled, stored and later plasticized in a twin-screw extruder. In the new approach, solid and liquid components are fed directly into the extruder through gravimetric dosing systems. The company says the change can reduce energy costs, shorten production time and support a rapid return on investment, while improving flexibility when formulations change.

From batch mixing to inline compounding

In the traditional sequence, PVC powder, plasticizers, additives and fillers are processed batchwise in a heating-cooling mixing combination to create a dry blend. After cooling and intermediate storage, the mixture is plasticized in a twin-screw extruder and formed into membrane. PVC InlineMixing removes the separate mixing and storage steps by metering all components directly into the extruder as required. The result is a continuous process rather than a batch-based preparation stage followed by extrusion.

Cost, space and maintenance claims

According to KraussMaffei Extrusion, avoiding a separate heating-cooling-mixing combination reduces capital expenditure because that equipment no longer has to be purchased. The material is also heated only once. Depending on the formulation, system parameters and location, the company says energy consumption and related costs can fall by up to 75%. Removing the separate mixer also reduces the footprint of the overall system and lowers labor requirements, while maintenance costs decline because wear parts for the heating-cooling mixer are no longer needed. The company links the combination of lower capital and operating costs to improved overall cost-effectiveness and quicker payback.

Flexibility during production

The continuous design also changes how formulation and color changes are handled. KraussMaffei Extrusion says adjustments can be made directly during operation through the integrated control system, avoiding the time-consuming preparation and interim storage of separate dry-blend batches. Christopher Bartel, head of sales for flat and foam at KraussMaffei Extrusion, described lower production costs, greater flexibility and more efficient manufacturing as a competitive advantage for roofing membrane producers. In his view, manufacturers can respond more quickly to new requirements and adjust formulations during production while reducing energy and capital expenditure.

Equipment and validation

The process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and validated with industrial roofing membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing formulation ingredients. The ZE BluePower series has a Da/Di ratio of 1.65; the company says the combination of high torque and large free volume provides a wide process window for different formulations. Tests confirmed high gelation levels and product quality, and the mechanical properties and weldability of the membranes met industrial requirements across several formulations.

Industrial line and outlook

PVC InlineMixing is already used in an industrial production line for PVC roofing membranes. The reference plant reaches a total throughput of 1,800 kg/h with two extruders and two calenders. PVC, additives, fillers and the resulting edge trimmings are processed continuously into finished membranes. Bartel said the results demonstrate the potential of PVC InlineMixing for industrial roofing membrane production. At the Technology Center, KraussMaffei Extrusion works with customers to test specific formulations under production-relevant conditions, optimize the process and prepare for industrial implementation.

The company presents PVC InlineMixing as a way to combine high product quality with a leaner production route. The stated energy-saving figure depends on formulation, system parameters and location, and the reported performance is based on company testing and a reference line.

Reported by Maren Ostergaard, Earthmoving Equipment Analyst.