Vehicles & Transportation

SPRIND takes stake in Cylib to support battery recycling scale-up

Omar BenaliNovember 18, 20265 min read4 views

At a glance

  • The German agency's undisclosed investment makes it a shareholder in the Aachen startup, which is preparing industrial recycling capacity for lithium and other battery materials.
  • SPRIND has invested an undisclosed amount in Cylib and become a shareholder, backing the Aachen company's water-based process for recovering battery materials. Cylib reports recovery rates above 90% for lithium, graphite, nickel, cobalt and manganese, and is building industrial capacity in Germany while participating in a Porsche-backed recycled-cathode pilot.
A conceptual cutaway of a battery-recycling loop, showing an EV battery pack, black mass and recovered material powders moving through industrial processing equipment.

SPRIND, Germany's Federal Agency for Disruptive Innovation, has invested in Aachen-based battery recycling company Cylib and become a shareholder. The parties did not disclose the amount. SPRIND said the funding is intended to help Cylib further develop its technology and scale it to industrial maturity.

Cylib was founded in 2022 and is moving toward commercialisation. Its hydrometallurgical recycling plant is under construction in Dormagen, North Rhine-Westphalia. The company argues that Europe has limited domestic access to raw materials critical for battery production, while the number of end-of-life EV batteries rises each year. Its aim is to keep those materials in a closed loop, returning them from spent batteries to new value creation.

Lithium-first process

The process is based on research at RWTH Aachen. Earlier recycling approaches concentrated on nickel and cobalt, with lithium often recovered only at the end of the chain or lost in slag. Cylib's water-based OLiC process—Optimised Lithium and Graphite Recovery—instead recovers lithium in the first steps from black mass. Cylib says recovery rates exceed 90% for lithium, graphite, nickel, cobalt and manganese.

Co-CEO and co-founder Dr. Lilian Schwich said the technology originated in research and has been developed to the threshold of industrialisation. She said SPRIND understands the importance of technological innovation for critical value chains and what is needed to bring it to market.

Olav Carlsen, Innovation Manager at SPRIND, said breakthrough innovations do not only happen in the lab but also where a technology makes a new market possible. According to Carlsen, Cylib has the technological foundation to create a large-scale industrial market for battery materials that remain in circulation in Europe, strengthening Germany's and Europe's sovereignty in critical raw materials. He described such leaps as exactly the kind SPRIND wants to make possible.

Pilot with Porsche

A pilot project involving Cylib, Porsche and other partners has tested the process. Porsche announced in September that cathode active material made entirely from recycled raw materials—sourced from its own high-voltage batteries—had been produced for the first time. Cells made from that material are currently undergoing testing.

Industrial roll-out

Since September 2026, Cylib has been accepting end-of-life EV batteries at its first industrial site in Wernberg-Köblitz, Upper Palatinate, to process them into black mass. The facility is being ramped up gradually and is designed for a capacity of up to 10,000 tonnes per year.

In parallel, Cylib is building a large-scale hydrometallurgical plant in Dormagen, where the raw materials will be recovered. The project is classified as a "Strategic Project" under the EU's Critical Raw Materials Act.

Reported by Omar Benali, Vehicle Safety and Compliance Editor.