Packaging & Printing

Yangi adds undercut feature for dry-moulded fibre closures

Bram OosterhuisNovember 4, 20265 min read3 views

At a glance

  • The new capability is demonstrated with a coffee lid rated at 6 N removal force and tested with hot beverages at 93°C.
  • Yangi has added an undercut feature to its dry-forming platform, enabling secure snap-fit closures in moulded fibre. A coffee-lid demonstration met a 6 N removal force and maintained a seal through simulated hot-drink pours, with applications extending to food, personal care and consumer packaging.
A conceptual studio scene shows a precision-moulded fibre coffee lid with a defined undercut rim above a matching cup.

Yangi has added an undercut feature to its dry-forming platform for moulded fibre packaging, expanding the toolset available to customers seeking fibre-based alternatives to plastic components such as coffee lids.

Undercut geometries are often used in plastic packaging to create snap-fit connections and secure closures, providing a reliable mechanical fit between a lid and a container. Reproducing such shapes in moulded fibre is technically demanding, which makes the new capability a notable step for the format.

A coffee lid demonstrates the closure

Yangi is demonstrating the undercut capability through a coffee lid. The company says a precision-engineered undercut delivers a secure and consistent fit, with a measured lid removal force of 6 N.

The lid was tested through 10 simulated coffee pours over 10 minutes. It maintained a leak-tight seal and structural integrity when exposed to hot beverages at 93°C.

The feature targets closures that require a defined mechanical fit. Yangi is using the coffee lid to show that an undercut can be combined with sealing and structural performance under hot-drink conditions.

Applications extend beyond coffee

Yangi says the undercut technology is also suitable for fitted closures in snack containers, takeaway containers, dessert and ice cream tubs, confectionery packaging, dry and ambient food containers, and packaging for personal care products, cosmetics and consumer goods.

Carlo Semeraro, head of Commercial Partnerships at Yangi, said that achieving this level of precision in dry-moulded fibre depends on advanced tooling and forming expertise. He added that the coffee lid shows the performance Yangi can deliver today, while the larger opportunity lies in applying the functionality across a wider range of packaging.

Cellera platform underpins the feature

The undercut capability builds on Cellera, a dry-forming platform powered by Yangi’s patented fibre formation system, FiberIQ. Unlike conventional wet moulding, Cellera forms fibre without a water-based forming step. Yangi expects this to reduce water and energy requirements in the production of renewable, fibre-based packaging.

In a coffee lid application, Cellera’s four-second production cycle is estimated to reach an output of 300 lids per minute. The platform is designed for high-volume, cost-competitive manufacturing, combining precise fibre distribution with advanced forming technology to support consistent quality and functional performance.

Johann Kaiser, Yangi’s CEO, said the challenge is not simply to replace plastic with fibre but to make fibre perform at the level the market demands. He added that each new capability reinforces fibre’s position as a competitive alternative to plastic by delivering the functionality, quality and industrial performance needed to support the transition toward fibre-based packaging.

Summit demonstration and scale-up

Yangi will display the undercut feature alongside other elements of its dry-moulded fibre packaging range at the Sustainable Packaging Summit in Utrecht from 10 to 12 November 2026. Attendees can visit Stand 28 in the Networking Zone to view Cellera dry forming technology through an immersive VR experience.

The update follows Yangi’s announcement that it had commissioned its serial Cellera machine platform. Combining Cellera with the dry forming process is set to reduce resource consumption and CO2 emissions by 70%–80% compared with conventional plastic alternatives, according to the company.

Reported by Bram Oosterhuis, Rigid Packaging Materials Editor.