Vehicles & Transportation

dnata adds four Cobus VEGA electric apron buses at Rome Fiumicino

Astrid BerglundNovember 3, 20265 min read4 views

At a glance

  • The ground handler says it will be the first operator of Cobus's VEGA model, with the four battery-electric passenger buses due in service by mid-November.
  • dnata is putting four Cobus VEGA electric apron buses into service at Rome Fiumicino by mid-November, expanding a bus fleet that currently counts 40 vehicles, 23 of them already electric. The purchase belongs to a three-year Italian modernisation programme worth more than €30 million, in which over 60 per cent of the company's 1,000-plus motorised ground handling units are now electrically powered, with further conversion tied to airport charging infrastructure.
A generic electric apron bus with wide doors waits at an airport gate while passengers board, with ground crew and terminal buildings behind.

Ground handler dnata is expanding its vehicle fleet at Rome Fiumicino Airport with four fully electric apron buses supplied by manufacturer Cobus. The VEGA-model vehicles are scheduled to enter service by mid-November, carrying passengers between the terminals and the aircraft they are boarding or leaving. dnata says it will be the first ground handler to deploy this new model.

The buses were developed specifically for use on the apron. Compared with conventional airport buses, dnata says they offer a higher passenger capacity, while redesigned doors are intended to speed up boarding and alighting and improved air conditioning to raise passenger comfort. The company has not disclosed battery capacity, range or charging power, so the vehicles' duty cycle and charging arrangements at Fiumicino have not been detailed.

With the four additions, the bus fleet at Fiumicino will grow beyond its current 40 vehicles, of which 23 are already electrically powered. dnata frames the new vehicles as a way of making apron handling more efficient and keeping aircraft turnaround times as short as possible.

Part of a broader fleet renewal

The purchase sits inside a wider modernisation programme in which dnata has invested more than €30 million over the past three years. More than 550 new ground handling units have been acquired in that period across Rome Fiumicino, Milan Malpensa and Milan Linate. The equipment covers passenger buses as well as baggage tractors, conveyor belts, passenger stairs, aircraft loaders and pushback tractors.

Across the three Italian airports, dnata now operates more than 1,000 motorised ground handling units, of which over 60 per cent are electrically powered. Where full electrification is not yet operationally feasible, the company is gradually converting diesel-powered equipment to run on hydrotreated vegetable oil (HVO).

Charging infrastructure as a limiting factor

According to dnata, further electrification also depends on the expansion of charging infrastructure at the airports, and the company says it is working with the respective airport operators to achieve this. That statement points to a constraint that sits at least partly outside the handler's own procurement decisions.

In Italy, dnata employs around 5,000 people and serves more than 60 airlines. At its three locations, the company handles over 150,000 flights, 46 million passengers and nearly 18 million pieces of baggage a year.

The announcement did not include figures on the emissions or energy savings expected from the four vehicles, nor on what share of the airport's apron bus work they will cover.

Reported by Astrid Berglund, Vehicle Cargo and Roof System Analyst.